PUBLICATIONS FROM KOSER LAB

1. Hill, J. E., Kalkanci, O., McMurry, J., and Koser, H., “Hydrodynamic Surface Interactions Enable Escherichia Coli to seek efficient routes to swim upstream,” accepted to Physical Review Letters, Feb. 2007.
2. Kaya, T., Koser, H., Culurciello, E., “A Silicon-on-Sapphire Low-Voltage Temperature Sensor for Energy Scavengers,” Proc. IEEE Inter. Symp. Circuits and Systems (ISCAS), New Orleans, May 2007.
3. Kaya, T., Koser, H., Culurciello, E., “Low-voltage temperature sensor for micro-power harvesters in silicon-on-sapphire CMOS,” Electronic Letters, vol. 42 (9), p. 526-528, 2006.
4. Mao, L., Koser, H., “Towards Ferrofluidics for μ-TAS and Lab-on-a-chip Applications,” Nanotechnology, vol. 17, p. S34-S47, 2006.
5. Koser, H., Lang, J. H., “Magnetic Induction Machines for Micro-Turbomachinery – Part I: Design and Analysis," J. Microelectromechanical Systems, vol. 15 (2), p. 415-426, 2006.
6. Cros, F., Koser, H., Allen, M. G., and Lang, J. H., “Magnetic Induction Machines for Micro-Turbomachinery – Part II: Fabrication and Testing,” J. Microelectromechanical Systems, vol. 15 (2), p. 427-439, 2006.
7. Koser, H., Lang, J. H., “Magnetic Induction Machines for Micro-Turbomachinery – Part III: Eddy Currents and Nonlinear Effects,” J. Microelectromechanical Systems, vol. 15 (2), p. 440-456, 2006.
8. Mao, L., Koser, H., “An Integrated MEMS Ferrofluid Pump Using Insulated Metal Substrate,” Proc. of 31st Annual Conference of the IEEE Industrial Electronics Society (PCB MEMS Technology Special Session), Raleigh, North Carolina, USA, November 2005.
9. Mao, L., Koser, H., “Modeling An Integrated, High Flow Rate MEMS Ferrofluid Pump,” Proc. of Femlab Conference 2005, Boston, Massachusetts, USA, October 2005.
10. Kaya, T., Koser, H., “A Microfluidic Assay Design for Real-Time Bacterial Chemotaxis Studies,” Proc. of Femlab Conference 2005, Boston, Massachusetts, USA, October 2005.
11. Kaya, T., Koser, H., “A Study of Nonlinear Deflection Dynamics of a Piezoelectric Accelerometer,” Proc. of Femlab Conference 2005, Boston, Massachusetts, USA, October 2005.
12. Mao, L., Koser, H., “An Integrated, High Flow Rate MEMS Ferrofluid Pump,” Proc. of 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS), Boston, Massachusetts, USA, October 2005.
13. Mao, L., Koser, H., “Ferrohydrodynamic Pumping in Spatially Traveling Sinusoidal Magnetic Fields,” Proc. 10th International Conf. on Magnetic Fluids, Sao Paulo, Brazil, August 2004 (also published in J. Magnetism and Magnetic Materials, vol. 289, p. 199-202, 2005).
14. Maness, W. C., Casserly, M., and Koser, H., “Engineering a Mobile, Real-Time, Versatile Sensor Network,” Proc. International Conf. on Systems Engineering (ICSE) and International Council on Systems Engineering (INCOSE), Las Vegas, NE, USA, September 2004.
15. Freeman, D. M., Siddiqui, A., Koser, H., and Aranyosi, A. J., “A Microfluidics Laboratory Teaching Module,” Proc. ASEE Conference, Salt Lake City, Utah, USA, June 2004.
16. Mao, L., Koser, H., “Modeling Ferrofluids in Spatially Traveling Sinusoidally Time-Varying Magnetic Fields,” Proc. 3rd International Conf. on Computational Modeling and Simulation of Materials (CIMTEC), Sicily, Italy, May 2004.
17. Koser, H., Cros, F., Allen, M. G., and Lang, J. H., “Magnetic Diffusion Modeling in Nonlinear Micro-Media: A Modified Finite-Difference Time-Domain Approach,” Proc. International Conf. on Modeling and Simulation of Microsystems, San Francisco, CA, USA, February 2003.
18. Koser, H., Cros, F., Allen, M. G., and Lang, J. H., “A High Torque Density Magnetic Induction Machine,” Proc. 11th International Conf. on Solid-State Sensors and Actuators (Transducers), Munich, Germany, June 2001, p. 284-287.
19. Koser, H., Lang, J. H., “Modeling a High Power Density MEMS Magnetic Induction Machine,” Proc. of International Conf. on Modeling and Simulation of Microsystems, Hilton Head, SC, USA, March 2001, p. 286-289.